Tx Feature:
-AMPDU
-QoS Data
-Non Qos Data
-WDS Data(Not Mesh)
-IBSS Data
-Packet Sequence Number Maintain
-HTC insertion(RDG)
-HTC insertion
-(TXBF Sounding Frame)
-IPX(8137)
-AppleTalk(80F3)
-LLC Tunnel(AAAA03000000/ AAAA030000F8)
-VLAN Remove (per pkt control)

TXD
-HF (00: non-802.11 data frame) (pTxBlk->NeedTrans)
-ETYPE (1: indicate that this frame is an Ehternet-II frame which type/len >= 1536(0x600)) (RTMP_GET_PACKET_PROTOCOL(pkt) need check if already 802.3 packet in )
-VLAN (0: no VLAN field, 1: exist VLAN field) (RTMP_GET_PACKET_VLAN(pkt))
-RMVL (0: keep VLAN field, 1: remove VLAN field) (dat setting, current setting use 1 that remove vlan)
-MRD (More Data: TX_BLK_TEST_FLAG(pTxBlk, fTX_bMoreData))
-EOSP (End of service period: TX_BLK_TEST_FLAG(pTxBlk, fTX_bWMM_UAPSD_EOSP))
-PF (pTxBlk->CipherAlg)
-HE (must be 0)
-DAS
-OM[5:0]
-NA
-Header Padding (padding the dummy bytes in the head of header)

WTBL
-PA
-QoS (will be set when peer side has HT capability)
-TD (According to mac_entry->EntryType and )
-FD (According to entry type)

Tx Translation rule

Frame Control Field[15:0]
-Protocol version (fixed value: 0x00)
-Type[1:0] =2'b10 (Data SW guarantee)
-SubType[3:0]=4'b0000 (non-QoS) or 4'b1000(QoS) = WTBL.QoS bit
-ToDS = WTBL.TD
-FromDS = WTBL.FD
-MoreFrag = 1'b0 (fragment packet should be 802.11 format)
-Retry - HW generate
-PwrMgt
-MoreData = TxD.MRD
-ProtectFrame = TxD.PF
-Order = TxD.HE (must be 0)

Duration/ID[15:0] = 16'h0 (TMAC will replace this)

A1-A4
DA = (TxD.DAS = 0, DA in MSDU) or (TxD.DAS = 1, PA in WTBL) (use TMI_DAS_FROM_MPDU for TxD.DAS)
SA = SA in MSDU (DMA read it from header buffer)
BSSID = select by TxD.OM[5:0] for multiple BSSID
RA = PA in WTBL
TA = select by TxD.OM[5:0]

Sequence Control field[15:0] = HW prepare

QoS Control [15:0]
TID[3:0] = TxD.TID (pTxBlk->UserPriority)
EOSP(bit 4) = TxD.EOSP
Ack Policy[1:0]
	= 2'b01 if TxD.NA == 1
	= 2'b00 if TxD.NA == 0 and not PSMP queue (AC6)
	= 2'b10 if PSMA queue (AC6), TxD.NA must be 0
A-MSDU = 1'b0
QoS Control [15:8] = 8'h0 (Not support Mesh-TX header translation)

Driver Tx path:
1.not need to touch skb->data packet
2.Only build txd header and fill related information for ethernet-ii or 802.3 packet 

Rx Feature:
-Translation Enable/Disable (DCR.RX_HDR_TRANS_EN / DCR.RX_HDR_TRANS_CHK_BSSID)
-Translation Enable/Disable per Peer (WTBL.DIS_RHTR)
-QoS Data
-Non-QoS Data
-MPDU carry a MSDU
-MPDU carry a AMSDU
-No Error packet convert
-Fragment data convert